elmeg C46e Description And Installation page 76

g
Conduct your call.
a
Hang up the receiver.
4.6.2 Connecting two external callers with one another
Please note that ISDN terminals can only carry out forwarding of external
calls to an external party via the keypad function, or using a special button.
If you connect two external callers after an enquiry call, please note:
•
During this call, two B channels of your PABX are occupied.
•
The call rates are charged the same for normal connections.
If you started both external calls, you will be charged for the
two calls between the external parties. If you connected an
external caller after an enquiry call to another external party,
the caller will be charged for his/her call and you will be char-
ged for the call that you forwarded.
g
In an enquiry call you are conducting an external call; the first
external call is placed on hold.
You would like to connect the two external callers with one
another and wish to end the call yourself.
R
Press the signal button.
*4
Press the button * and then the button 4.
a
Hang up your receiver.
The two external callers are now connected.
4.6.3 Forwarding calls without prior notice
Call transfer without prior notice (explicit call transfer). You can forward calls
within the PABX by dialing the number of the person you wish to call and then
hanging up your receiver. The person you are calling is then called and receives
the call after lifting the receiver.
g
Conduct your call.
R
Press the signal button.
You will hear the internal dial tone .
72
a/b-ISDN