Table of Contents
Advertisement
Configuration settings
Telephone numbers (MSN extension numbers)
Up to 10 MSN (extension numbers) can be configured on your telephone. When you enter an
MSN or extension number in your ISDN system telephone you are essentially defining that
your ISDN system telephone is called using this MSN or extension number when a call is
made. If you enter more than one MSN extension number in your telephone, your phone will
ring each time one of these MSN extension numbers is called.
If you are using your telephone on the external ISDN port of a pabx, enter its internal extensi-
on number into the pabx. Please observe the instructions in the PABX manual.
When you call a subscriber, you can select a certain number (MSN) that is transmitted to the
subscriber (e. g. for separate charges). If you do not select any number, the number (MSN)
that has been entered first in the phone (MSN-1) is used.
How to configure an MSN (extension number) is described as follows for
»MSN-1«.
Begin as follows:
M
a
Configuration
Entering or viewing an MSN extension number (MSN)
You can only enter the MSN extension numbers with the Professional Configurator supplied
on the WIN-Tools CD-ROM. However, you can have the programmed number displayed at
the phone.
In the »Program MSN-1« menu, press the »MSN ext.« softkey.
The programmed number is displayed.
O
Press OK to leave this menu.
You can only make further settings (e.g. call signaling melody, volume, name) if the
number has already been previously configured.
Setting the melody and the volume
You can define and set a specific melody and its volume for each MSN or extension number
that you enter. If you are using the telephone at an internal ISDN connection of certain elmeg
PABX systems, you can program special ringing melodies and a different volume for internal
calls.
s
s
MSN
Settings
ˆ
Program MSN-1
s
ˆ
MSN-1
ˆVolume
ˆSound
ˆ
Program MSN-1
ˆ---------------------
ˆMSN-1:
¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬
}
transfer
MSN Name
MSN ext.
}
222
55
Advertisement
Table of Contents
