elmeg C46e Description And Installation page 93

4.13.2 Call rerouting, delayed
The call is signaled at the dialed terminal for about 15 seconds; after that the
call is rerouted to the programmed terminal. The terminal that was originally
dialed is no longer called.
b
Lift up the receiver of your phone.
You will hear the internal dial tone.
*62
Dial this code *62.
t
Dial the inhouse terminal extension number (00...99) (call desti-
nation).
or
t
For external call rerouting, first enter 0 or *80, and then the
external number.
#
End entry.
q
You will then hear the acknowledgement signal for about 1 se-
cond, followed by the special dial tone.
a
Hang up the receiver.
4.13.3 Call rerouting, on busy
The call is rerouted immediately to the programmed terminal when the line that
was originally called is busy. Barring of call waiting must be configured here,
as otherwise call waiting will be carried out and not call rerouting.
b
Lift up the receiver of your phone.
You will hear the internal dial tone.
*63
Dial this code.
t
Dial the inhouse terminal extension number (00...99) (call desti-
nation).
or
89
a/b-ISDN
a/b-ISDN