elmeg C46e Description And Installation page 65

If, during an intercom call, the headset of the system telephone is lifted up, the
call is transformed into a normal call.
If an intercom connection is not ended by one of the two subscribers, this
connection is terminated automatically in the PABX after a defined time (ap-
prox. 2 minutes).
If the don't disturb function is activated at a system telephone, no intercom
connections are possible at this phone. You can also specifically inhibit or permit
intercom calls using a function key, or a code procedure.
Enable (permit) intercom calls
b
Lift up the headset of your system telephone.
You will hear the internal dial tone.
*590
Select this code.
q
You will hear the acknowledgement signal.
a
Replace the headset.
Intercom calls are now possible at your system telephone.
Inhibit intercom calls
b
Lift up the headset of your system telephone.
You will hear the internal dial tone.
#590
Select this code
q
You will hear the acknowledgement signal.
a
Replace the headset.
Intercom calls are not possible at your system telephone.
61
C/CS