elmeg C46e Description And Installation page 78

4.6.5 Broker's call (operation varies with
terminal used)
The "broker's call" feature permits you to switch back and forth between two
inhouse subscribers, two external callers or between an inhouse and external
caller. The caller put on hold will, if so programmed, hear music on hold.
g
You are conducting a call and wish to conduct an enquiry call.
R
With analog phones press the flash button.
Please consult the operating instructions for information on
this function for ISDN phones.
You will hear the internal dial tone; the first caller is placed on
hold.
t
Dial the number of the party you wish to call .
You will hear the ringing tone .
The user is called and lifts up the receiver.
g
Conduct your enquiry call.
R*2
With analog phones, first press the flash button and then dial
the code *2 to switch between the first and second caller.
g
Continue with your first call.
or or
r
Please consult the operating instructions for information on
this function for ISDN phones. .
g
Continue with your call.
a
Hang up the receiver to end the call.
When you are switching between an inhouse party and an external caller
and hang up the receiver your call is ended and your two callers are con-
nected with one another!
When you are switching between two external callers and hang up the re-
ceiver, the existing call is ended and the call that was placed on hold is si-
gnaled with "return call".
When, during a broker's call, you press the button * and then the but-
ton4, the two external callers are connected with one another and your
call with the external callers is ended.
74
a/b-ISDN