elmeg C46e Description And Installation page 97

t
For external call rerouting, first enter 0 or *80, followed by
the external number.
#
End entry.
q
You will then hear the acknowledgement signal for about one (1)
second, after which the connection will be terminated; you will
hear the busy signal.
a
Hang up the receiver.
4.14.4 External cancellation of Follow Me
b
Lift up the receiver of your phone (external subscriber).
t
Dial the service number for your PABX.
(Multipoint connection: MSN
point-to-point connection: System number + extension)
Once remote access for call rerouting has been enabled, and if it is possible at
this time (analog port 8 available), you will hear the special dial tone at your
PABX..Set your phone to DTMF-mode or use a portable DTMF transmitter.
t
Enter the PIN for your PABX.
q
You will then hear the acknowledgement signal for about one (1)
second.
#64
Select this code.
t
Select the internal terminal extension (00.....99) whose rerou-
ting you wish to cancel.
#
End entry.
q
You will then hear the acknowledgement signal for about one (1)
second, after which the connection will be terminated; you will
hear the busy signal.
a
Hang up the receiver.
93
a/b-ISDN