Table of Contents
Advertisement
Programming completion of call to busy subscriber
b
t
Dial number
The »Clbckbusy« softkey is only displayed, when automatic completion of calls are possi-
ble with the exchange office or with the pabx. The features »Completion of call to busy sub-
scriber« or »Completion of call on no answer« must be applied for at your service provider for
external call-backs.
You can configure three call-backs at a time. If you are using an LCR procedure (e. g. the
LCR procedure of the phone), the »Completion of call to busy subscriber« function is carried
out automatically via your standard network service provider.
If automatic redialing is active, the »Clbckbusy« softkey is shown on the display.
Press the right arrow button or the »continue« softkey, to return to the normal
idle state display.
Viewing and clearing call-back calls
When the phone is in idle, any call-back calls that are initiated can be viewed in the display by
pressing the softkey »Clbckbusy«. Press this softkey to view the call-back calls. You can
then view the individual completion calls using the arrow keys. If you wish to delete a call
completion, select this call using the arrow key and then press the menu key, followed by the
»delete?« softkey.
All completions of call are automatically deleted after a predefined period. This time is set by
the service provider for external call-backs and by the PABX system for internal call-backs.
If the ISDN telephone is disconnected from the ISDN network, (for example by un-
plugging the ISDN connector of the phone or by switching off or resetting the
pabx), all requested call completions will be lost.
Parking
The parking function allows you to interrupt a call for up to three minutes. You can then un-
plug the plug-in connector for your ISDN system telephone from the ISDN outlet and plug it in
in a different room. You can continue with the previous call after »unparking« it. Or you can
»unpark« the call at a different phone and continue your call there.
Parking is only possible when only one connection is currently active with your ISDN telepho-
ne. After you unpark the call, the number for the parked subscriber will no longer be shown.
A »parking code« (0.... 99) is used to ensure that you are returned to the proper call when two
calls are parked. The default parking code is 55.
24
g
Subscriber busy or
Clbckbusy
does not answer
Making telephone calls
s
a
Kommunikationstechnik
Advertisement
Table of Contents
