Connecting The Ac Adapter (Optional) - Nikon P-400R Instructions Manual

2.4
The optional AC adapter allows the P-400R to be used with AC power. We
recommend that you use the AC adapter if you perform long-time or interval
shooting.
Note: Notes on the AC adaptor
 Always use the AC adapter that is dedicated to the P-400R.
2
 Always use the power cord designated in "11. Major Specifications".
 Before you connect the AC adapter to the P-400R or disconnect the AC
adapter from the P-400R, make sure that the P-400R power is off. If you
connect or disconnect the AC adapter when the P-400R power is on, the
P-400R or data might be damaged.
 The battery in the P-400R is not charged when the AC adapter is connected to
the P-400R. If you want to charge the battery that is in the P-400R, remove
the battery from the P-400R, and then charge the battery with the P-CH01
P-BACH battery charger.
 When P-400R has been installed in the P-MFSC Motorized Focusing Stand
Controller, the AC adapter cannot be used. Be sure to remove the AC adapter.
1 Make sure that the P-400R power (lamp) is off.
2 Connect the DC output cable of the AC adapter to the P-400R DC input
terminal.
A cover is attached to the P-400R DC input terminal. Open it when making a
connection.
3 Use a designated power cord to connect the AC adapter to an AC outlet.
About the usage of the AC adapter
 Because the AC adapter operates 100 to 240 VAC, 50/60 Hz power supply, it
can be connected to any AC outlet throughout the world.
 You can use the optional P-CAC AC Adaptor Extension Cable to extend the
DC output cable of the AC adapter.
P-400R Digital Microscope Instructions

Connecting the AC Adapter (optional)

DC input
terminal
DC output cable
16
AC adapter
Power cord
To AC outlet