Basic Operation; Turning On The Power; Directing The P-400R To The Object - Nikon P-400R Instructions Manual

3
This chapter explains you how to capture and play back images using the P-400R.
For the details
This chapter explains only simple operational procedures. For details, see "4
Basic Operations for Capturing and Playing Back".
Caution: About ring illuminator
3
When the P-400R power is turned on, ring illumination may automatically light.
Do not point the luminous section to a person and do not look it directly.
(1)

Turning on the power

1 Press the power switch to turn
on the P-400R power.
When the power is turned on, the
power switch indicator lights in
green with a startup sound.
(2)

Directing the P-400R to the object

1 Open the LCD panel.
The live image is displayed on the
LCD monitor.
2 Direct the P-400R to the object
and adjust the position so that
the object displayed on the LCD
monitor is focused.
The focus position of the P-400R is
about 29 mm off the objective.
Install P-400R in a commercially
available tripod or use contact
observation adapter that comes
with the P-400R as required.
P-400R Digital Microscope Instructions

Basic Operation

LCD panel
18
Power switch
Object