Nikon P-400R Instructions Manual page 90

Restarting shooting/playback mode
From the setup menu, to place the P-400R in playback mode again, press the
capture switch. To place it in playback mode again, press the playback button (
Pressing the [MENU] button places the P-400R in the previous mode again.
Operations that can be performed using the setup menu
The following table describes the operations that can be performed by using the
setup menu.
Table: Operations that can be performed using the setup menu
Section
Adjusting the Brightness of
7.1
the LCD Monitor
Adjusting the Volume of the
7.2
Operation Sound
7
Selecting the Video Output
7.3
Signal Format
Selecting the Shutter
7.4
Release Method
7.5 Initializing an SD Card
Setting the Automatic Power
7.6
Save Function
7.7 Selecting the Language
Setting the Current Date and
7.8
Time
Checking the Version
7.9
Information
7.10 Restoring the Initial Settings
P-400R Digital Microscope Instructions
Item
The brightness of the LCD monitor
can be selected from five levels. The
brightness can be adjusted by
checking the gray scale.
The volume of the sound emitted
when the P-400R is turned on or an
operation is performed can be
selected from Loud, Normal, Soft,
and OFF.
The format of video output signal can
be selected from NTSC, PAL, and
OFF.
Whether the capture switch on the
P-400R or the optional external
release switch (P-RELS) is used to
release the shutter can be selected.
The SD card inserted in the P-400R
can be initialized.
The P-400R can automatically enter
standby mode if no operation is
performed for a length of time. The
time can be specified from the setup
menu.
The language of the text displayed in
the LCD monitor can be selected
from English and Japanese.
The current date and time can be set.
The version information of the
P-400R firmware can be displayed.
The P-400R settings can be
initialized to the factory default
settings.
74
Description
).
Page
75
75
76
76
77
77
78
78
79
80