5.11
Using Shading Correction
Shading correction is functionality that corrects uneven exposure that is due to, for
example, limb darkening. You can select whether to enable this functionality. The
procedure is as follows.
1
Select [Shading correction], and then
press the [OK] (or right) button.
2
Select [Shading correction], and then
press the [OK] (or right) button.
The [Shading correction] screen appears.
3
Select either of the following items to
determine whether to enable shading
correction:
Shading ON (initial setting)
Shading correction is performed. Select
this setting for normal use.
OFF
Shading correction is not performed.
3
Press the [OK] (or right) button to apply
the selection.
The [shooting menu] screen appears
again.
P-400R Digital Microscope Instructions
65
5