Formatting The Sd Card - Nikon P-400R Instructions Manual

Removing the SD card
1 Turn off the power of the P-400R.
2 Open the cover of the SD card.
3 Remove the SD card.
Press the inserted SD card gently
(1) and the card will pop out from
the slot (2). Pull it out straight.
4 Close the cover of the SD card.
(2)

Formatting the SD card

If the P-400R is turned on when the inserted SD
card has not been formatted, a confirmation
message is displayed on the LCD monitor.
This message prompts you to initialize the SD
card.
About initializing the SD card
 Before using an SD card, which was used with any other device, on P-400R,
be sure to format it in P-400R.
 After formatting, the data stored in the SD card will be all deleted. If some
important data is contained in the SD card, take the backup to the personal
computer, etc. before starting initialization.
P-400R Digital Microscope Instructions
13
1
2
2