Using Custom Settings - Nikon P-400R Instructions Manual

4.3.7
You can register a maximum of four kinds of shooting conditions as "custom settings".
One of four kinds of settings registered as Custom 1 to Custom 4 can be reproduced
by selecting Custom 1 to Custom 4 for the scene mode.
About registering custom settings
For details about how to register custom settings, see "5.1 Registering a Custom
Definition".
1 Make sure that the product is in
shooting mode.
4
2 Press the top button (
multi-selector to display the scene
mode selection menu.
The scene mode, custom setting, and
aperture mode icons appear.
3 Use the top and bottom buttons of the
multi-selector to select the custom
setting selection icon.
4 Use the right and left buttons of the
multi-selector to select the desired kind
of custom settings.
 Custom 1 to 4
Reproduces one kind of registered
custom settings.
5 Press the [OK] button to apply the
selection.
The live image is displayed again. The icon
for the selected kind of custom settings is
displayed at the top left of the screen.
If no operation is performed for six
seconds, the selection is cancelled and the
live image appears again.
About settings at the power-on time
The selection of custom settings is saved when the power is turned off. Next time
the power is turned on, the previously selected kind of custom settings is
selected again.
P-400R Digital Microscope Instructions

Using custom settings

) of the
34
LCD panel
Top button
Scene mode selection menu
Custom setting
selection icon