Switching The Metering Method - Nikon P-400R Instructions Manual

5.8

Switching the Metering Method

You can set the metering method used for observation and capturing. The procedure
is as follows.
1 In shooting mode, press the [MENU]
button to display the [Shooting menu]
screen.
2 Select [Metering method], and then
press the [OK] (or right) button.
The [Metering method] screen appears.
3 Select either of the following two
metering methods:
 Averaging metering (initial setting)
The exposure is adjusted so that the
average exposure value in the metering
area and the preset value match.
 Peak-hold metering
The exposure is adjusted so that the
highest (peak) exposure value and the
preset value match.
4 Press the [OK] (or right) button to apply
the selection.
The [Shooting menu] screen appears
again.
P-400R Digital Microscope Instructions
61
5