Preparing The Sd Card; Inserting The Sd Card - Nikon P-400R Instructions Manual

2.2.1
Insert a commercially available SD card into in the SD card slot of the P-400R.
About preparing an SD card
If an SD card has not been inserted, a message to that effect is displayed in the
LCD panel when the product is turned on, and you cannot perform operations.
Before you start observation or capturing, make sure that an SD card has been
2
inserted.
(1)

Inserting the SD card

1 Turn off the power of the P-400R.
Check that the power indicator is off.
2 Open the cover of the SD card.
Slide the SD card cover to the
direction of (1) and open it to the
direction of (2).
3 Insert the SD card.
Insert the SD card in the correct
orientation as shown in the right
figure. Push forward until it clicks.
4 Close the cover of the SD card.
Close the SD card cover to the
direction of (1) and slide it to the
direction of (2).
Pay attention to the inserting direction of the SD card
The SD card cannot be inserted in the opposite orientation. If you insert it forcibly
in the incorrect orientation, there is a risk to damage the SD card or the P-400R.
P-400R Digital Microscope Instructions

Preparing the SD card

12
SD card cover
1
2
Label side
2
1