Setting An Existing Folder As The Active Folder - Nikon P-400R Instructions Manual

5.2.2
You can set an existing folder as the active folder. The procedure is as follows.
1 In shooting mode, press the [MENU]
button to display the [Shooting menu]
screen.
2 Select [Active folder], and then press
the [OK] (or right) button.
The [Active folder] screen appears.
3 Select [Select folder], and then press
5
the [OK] (or right) button.
The [Select folder] screen, which lists the
three-digit numbers of the folders saved on
the SD card, appears.
4 Select the folder you want to use as the
active folder.
5 Press the [OK] (or right) button.
The selected folder is set as the active
folder.
The [Shooting menu] screen appears
again.
Maximum number of folders
A maximum of 900 folders (100NIKON to 999NIKON) can be created on a SD
card. When the number of created folders reaches the maximum, a message
prompting you to delete unnecessary folders or replace the SD card appears.
P-400R Digital Microscope Instructions

Setting an existing folder as the active folder

52