7.10
You can restore the P-400R initial settings. The procedure is as follows.
1
Display the [Setup menu] screen.
2
Select [Reset all], and then press the
[OK] (or right) button.
A confirmation message appears.
3
Use the top and bottom buttons of the
multi-selector to select [Yes] or [No],
and then press the [OK] (or right)
button.
If [Yes] is selected, the P-400R settings are
initialized to the factory settings.
The [Setup menu] screen appears again.
The settings that will be initialized
7
The following settings will be initialized:
Settings that can be specified from the shooting menu
Settings that can be specified from the playback menu
Settings that can be specified from the setup menu (except the language and
time settings)
Scene mode settings
White balance settings
Exposure compensation
P-400R Digital Microscope Instructions
Restoring the Initial Settings
80