8
Connecting to a PC
If the optional USB cable (P-CUS) is used to connect the P-400R to a PC, the images
saved in the P-400R can be transferred to the PC. The procedure is as follows.
1
Turn off the P-400R.
2
Start up a PC.
3
Use the optional USB cable (P-CUS) to connect the P-400R to the PC.
4
Turn on the P-400R.
The indicator in the power switch lights up. When the P-400R is turned on, the
PC recognizes the connected P-400R.
5
Transfer image files to a PC using ShuttlePix Editor.
For the operational procedure for ShuttlePix Editor, see the ShuttlePix Editor
documentation.
6
After transfer is completed, turn off the P-400R, and disconnect it from
the PC.
Make sure that you turn off the P-400R before disconnecting the USB cable.
Stand connecting
terminal
Notes on connecting the USB cable
When connecting the USB cable, make sure that you plug the connectors at
both ends of the cable correctly, without putting excessive pressure on the
connectors.
Do not use a USB hub when connecting the P-400R to the PC.
P-400R behavior during USB connection
When the P-400R is connected to a PC, the P-400R LCD monitor is turned off,
and the P-400R does not accept any operations other than turning on or off the
power switch.
P-400R power when connecting to a PC
When the P-400R is connected to a PC, use a well-charged battery or an optional
AC adapter so that the power is not running out during operation.
P-400R Digital Microscope Instructions
USB cable (P-CUS)
81
PC
8