Selecting A Scene Mode Suitable To The Specimen - Nikon P-400R Instructions Manual

4.3.6
Several scene modes are provided according to typical specimens. Selecting a
scene mode can use the setting suitable to the specimen.
1 Make sure that the product is in
shooting mode.
2 Press the top button (
multi-selector to display the scene
mode selection menu.
The scene mode, custom setting, and
aperture mode icons appear.
3 Use the top and bottom buttons of the
4
multi-selector to select the scene
selection icon.
4 Use the right and left buttons of the
multi-selector to select the desired
scene mode.
There are five scene modes. (See the
following table.)
5 Press the [OK] button to apply the
selection.
The live image is displayed again. The icon
for the selected scene mode is displayed at
the top left of the screen.
If no operation is performed for six
seconds, the selection is cancelled and the
live image appears again.
Icon
P-400R Digital Microscope Instructions

Selecting a scene mode suitable to the specimen

Scene mode
General mode that can be used without detailed
Standard
settings.
Suitable for capturing a silicon wafer or IC chip.
Wafer/IC Chip
Suitable for capturing a metal specimen. Bright parts
are expressed as white, and dark parts are expressed
Metal Ceramic
clearly. This mode can also be used for ceramic and
plastic specimens.
Suitable for capturing a circuit board, etc. Clipping of
highlights in component leads and solder joints is
Circuit Board suppressed, allowing defects to be easily detected.
This mode is also suitable for high-contrast subjects
such as gears and other metal components.
Suitable for capturing the color filters for flat display
FPD (Flat Panel
devices, such as liquid crystal display and plasma
Display)
display.
) of the
32
LCD panel
Top button
Scene mode selection menu
Scene selection icon
Meaning