Nikon P-400R Instructions Manual page 107

Battery/System
Message
Battery The battery has run out. After this message, the power is
exhausted.
Battery is at The temperature of the
high battery has exceeded
temperature. 60C.
System error An error has occurred
in the internal circuit of
the camera.
The battery voltage is
higher than the normal
voltage.
The temperature of the
usage environment is
low and the battery
temperature has
become -10C or less.
Transfer error A cable has been
removed during
communication with a
PC.
P-400R Digital Microscope Instructions
Meaning
automatically turned off. Charge the
battery or replace it with a charged
one.
After this message is displayed, the
power is automatically turned off.
If this message appears during the
normal use, a failure is concerned.
Ask your nearest Nikon
representative for repair.
After this message, the power is
automatically turned off.
If this message appears during the
normal use, a failure is concerned.
Ask your nearest Nikon
representative for repair.
After this message, the power is
automatically turned off. Replace the
battery with a proper one.
If this message appears during the
normal use, a failure is concerned.
Ask your nearest Nikon
representative for repair.
After this message, the power is
automatically turned off. Use it under
the proper environment.
Turn off the power of the P-400R
before plugging or unplugging the
cable.
91
Action Ref.
6
23
–
–
–
–
9
81