Setting The Active Folder; Creating A New Folder - Nikon P-400R Instructions Manual

5.2

Setting the Active Folder

Specify the folder in which images will be saved.
Location and name of the active folder
The active folder is created in the DCIM folder on the SD card. The format of the
folder name is nnnNIKON (nnn: three-digit number).
5.2.1

Creating a new folder

You can create a new folder and set it as the active folder. The procedure is as
follows.
1 In shooting mode, press the [MENU]
button to display the [Shooting menu]
screen.
2 Select [Active folder], and then press
the [OK] or right) button.
The [Active folder] screen appears.
3 Select [Create a new folder], and then
press the [OK] (or right) button.
The [Create a new folder] screen appears.
4 Use the multi-selector to enter a
three-digit number.
 Folder name (initial value: 100NIKON)
The folder name format is nnnNIKON
(nnn: three-digit number). Any one-digit
numeric value can be set for each digit.
The digit can be selected by using the
right and left buttons. The numeric value
can be selected by using the top and
bottom buttons.
5 Press the [OK] (or right) button.
A new folder is created and set as the active folder. If a folder with the same
name as the new folder already exists, a warning message appears.
The [Shooting menu] screen appears again.
A new folder is automatically created in the following cases:
 When the SD card is initialized.
 When the number of files in one folder reaches 200.
 When the largest image file number in the current active folder reaches 9999.
The three-digit number to be assigned to an automatically created folder starts
with 100. If there are already 100NIKON and 105NIKON folders, a folder named
101NIKON will be created automatically.
P-400R Digital Microscope Instructions
51
5