Specifying The Playback Folder - Nikon P-400R Instructions Manual

6.2
You can select the playback folder. The images contained in the playback folder are
played back when a playback operation is performed.
Normally, the active folder is specified as the playback folder. You can temporarily
select any folder as the playback folder. The procedure is as follows.
When the playback mode is terminated, the setting of the playback folder is reset and
the active folder is specified as the playback folder.
1 In playback mode, press the [MENU]
button to display the [Playback menu]
screen.
2 Select [Playback folder], and then press
the [OK] (or right) button.
The [Playback folder] screen appears.
3 Select either of the following menu
6 items:
 Active folder (initial setting)
The folder currently used as the active
folder is selected as the playback folder.
 Select folder
Select this menu item if you want to
specify a specific folder in the DCIM
folder as the playback folder.
4 Press the [OK] (or right) button.
If [Select folder] is selected, a list of folders
is displayed.
5 If [Select folder] is selected, use the top
and bottom buttons of the
multi-selector to select the folder you
want to use as the playback folder, and
then press the [OK] (or right) button to
apply the selection.
The [Playback menu] screen appears
again.
About settings of the playback folder
The selection of the playback folder is reset. When the P-400R is turned on the
next time, the active folder set as the default is used as the playback folder.
P-400R Digital Microscope Instructions

Specifying the Playback Folder

72