Nikon P-400R Instructions Manual page 65

Operations that can be performed using the shooting menu
Table: Operations that can be performed using the shooting menu
Section
Registering a Custom
5.1
Definition
5.2 Setting the Active Folder
Selecting the Image
5.3
Quality Mode
5.4 Selecting the Image Size
Selecting the Exposure
5.5
Mode
5.6 Program AE Settings
Setting the Quality of
5.7
Images to be Captured
Switching the Metering
5.8
Method
Switching the Metering
5.9
Area
Using Continuous
5.10
Shooting Mode
Using Shading
5.11
Correction
5.12 Setting the Scale
P-400R Digital Microscope Instructions
Item
A maximum four sets of shooting
conditions can be registered as custom
definitions.
The folder in which captured images will
be saved can be specified.
The quality of images to be recorded can
be selected from TIFF, JPG FINE, JPG
NORMAL, and JPG BASIC.
The size of images to be recorded can be
selected from 2 MB and 0.5M.
The exposure mode can be selected from
Program AE, Shutter-priority AE, and
Manual.
The upper limit on the camera gain and
the lower limit on the shutter speed in
Program AE mode can be set.
The image quality settings for observation
or capturing can be specified. The
settings that can be specified are chroma,
hue, contrast, sharpness, color effect, and
RB adjustment.
The metering method can be switched
between averaging metering and
peak-hold metering methods.
The size of the area used for photometry
can be selected from Large, Middle, and
Spot.
The continuous shooting mode can be
selected from Single, Timer Best Shot
Selector, and Interval Shooting.
Whether compensation for image shading
is enabled or disabled can be selected.
The scale settings can be specified.
Whether to display the scale and whether
to embed the scale in the image can be
selected.
49
Description Page
50
51
53
54
55
5
56
58
61
62
63
65
66