Specifi Cations - Intermec EasyCoder 501 XP Service Manual

1.2 Specifi cations
Printing
Print Technique
Printhead Resolution
Print Speed (variable)
Print Width (max)
Media Width (max/min)
Print Length (max)
Internal Media Roll Diameter (max)
Media Roll Core Diameter
Ribbon Length (max)
Ribbon Width (max)
Print Directions
Modes of Operation
Tear Off
Peel Off
Internal Liner/Batch Takeup
Cut Off
Firmware
Operating System
Smooth Fonts
Built-in scalable fonts (std)
Built-in bar code symbologies (std)
Startup Program (std)
Physical Measures
Dimensions (W x D x H)
Weight (excluding media & options)
Ambient Operating Temperature
Humidity
Electronics
Microprocessor
On-board Flash SIMMs
On-board DRAM SIMMs
Real-Time Clock
Power Supply
Mains Voltage
PFC Regulation
Maximum Power Consumption
Intermec EasyCoder 501 XP – Service Manual Ed. 4
Direct Thermal & Thermal Transfer
12 dots/mm (304.8 dots/inch)
100 to 300 mm/sec (4 to 12 inches/sec)
106.6 mm (4.20 inches)
120 mm (4.72 inches)/25.4 mm (1.00 inch)
32,767 dots = 2,730 mm/107.5 inches
205 mm (8 inches)
38 to 40 mm (1.5 inches) or 76 mm (3 inches)
450 metres (1475 feet)
110 mm (4.33 inches)
4
Yes
Optional
Optional
Optional
Fingerprint 7.40 incl. Intermec Direct Protocol
TrueDoc and TrueType fonts
15
36
Intermec Shell v. 4.4
275 x 480 x 238 mm (10.8 x 18.9 x 9.4 inches)
13 kg (28.7 pounds)
+5°C to +40°C (+41°F to +104°F)
20 to 80% non-condensing
32 bit RISC
1 to 3 (2 or 4MB each)
1 to 2 (1 x 4MB + 1 x ≤ 32MB)
Yes
>90 to <264 VAC, 45 to 65 Hz
IEC 61000-3-2
Continuous 175W; Peek ≈ 400W
Chapter 1 Models and Options
1
With internal takeup unit
With internal takeup unit
With cutter
Unicode fonts
Std. 1 x 2MB
Std. 1 x 4MB
10+ years life
2
11