Easycoder Pc4 Specifications - Intermec EasyCoder PC4 Service Manual

Chapter 1—Models and Options
1.3 EasyCoder PC4 Specifications
Printing
Print Technique
Printhead Resolution
Print Speed (selectable)
Print Width (max) at 203.2 dpi
Print Width (max) at 300 dpi
Print Length (min/max) at 203.2 dpi 6.35/472.5 mm (0.25/18.6 inches)
Print Length (min/max) at 300 dpi
Media Width (min/max)
Media Thickness (min)
Media Thickness, rolls (max)
Media Thickness, fan-folds (max)
Media Roll Diameter (max)
Media Roll Core Diameter
Ribbon Width (min/max)
Ribbon Roll Diameter, Outer (max)
Ribbor Roll Core Diameter, Inner
Print Directions
Modes of operation
Tear Off (Straight-through)
Peel Off (Self-strip)
Firmware
Operating System
Fonts
Font Magnification
Built-in Bar Code Symbologies
Physical Measures
Dimensions (W × L × H)
Weight (excluding PSU and media)
Ambient Operating Temperature
Ambient Storage Temperature
Humidity
Electronics
Microprocessor
On-board Flash memory
On-board RAM memory
Power Supply Unit
Input Voltage
Output Voltage
Input Voltage (mobile applications)
4
Thermal Transfer and/or Direct Thermal
203.2 dpi (8 dots/mm) or
300 dpi (11.81 dots/mm)
30, 40, 50, 75 or 100 mm/sec.
(1.2,1.6, 2, 3 or 4 in/sec.)
104 mm (4.1 inches)
102.2 mm (4.02 inches)
6.35/220.0 mm (0.25/8.66 inches)
25.4 to 118 mm (1.00 to 4.65 inches)
0.06 mm (0.003 inches)
0.15 mm (0.006 inches)
0.17 mm (0.006 inches)
127 mm (5.0 inches)
25.4 or 38.1 mm (1.0 or 1.5 inches)
33 to 110 mm (1.33 to 4.33 inches)
41 mm (1.6 inches)
13 mm (0.5 inches)
4
Yes
Yes
Intermec ESim v6.xx
5 resident
Horizontal max 8 times, vertical max 9 times
33
230 × 257 × 167 mm
(9.06 × 10.11 × 6.58 inches)
Approx. 2.3 kg (5 pounds)
+5°C to +40°C (+41°F to +104°F)
-20°C to +50°C (-4°F to +122°F)
10 to 90% non-condensing
16-bit 20 MHz (16M of address space)
1024K (774K firmware, 250K available to user)
2048K (576K firmware, 1050K print buffer)
Separate unit
100 to 240 VAC, 50 to 60Hz, 1.9A
24 VDC, 3.0A
23.5 VDC ± 0.5V, 6A peak
= 832 dots
= 1208 dots
Standard (no cartridge)
Standard (no cartridge)
Depending on model
No PSU connected
Intermec EasyCoder PC4—Service Manual