Preface; Intermec Easycoder 501 Xp – Service Manual Ed - Intermec EasyCoder 501 XP Service Manual

Chapter 0 Introduction

0.2 Preface

4
This Service Manual is intended to facilitate installation, trouble-
shooting and repair of the Intermec EasyCoder 501 XP in the
version delivered at the date of publishing. Thus, all information
on the Intermec Fingerprint fi rmware is based on version 7.40.
The on-going product improvement can be followed in the Printer
Technical Bulletins from Intermec.
This Service Manual is supplemented by the following publica-
tions, which the service technician also should keep easily avail-
able:
• Intermec EasyCoder 501 XP; User's Guide (multilingual)
• Intermec EasyCoder 501 XP; Installation & Operation manual
• Intermec EasyCoder 501 XP; Spare Parts Catalogue
• Intermec EasyCoder 501 XP; Installation Instructions
(for various options)
• Intermec Direct Protocol 7.xx; Programmer's Guide
• Intermec Fingerprint 7.xx; Programmer's Guide
• Intermec Fingerprint 7.xx; Reference Manual
Please note that the operations described in this manual only should
be carried out by skilled and authorized personnel with proper
training and full understanding of written English. The printers
contain wires and circuits with up to 380 VAC, which implies the
risk of electrical shock. Moving parts may also cause harm, if
incorrectly manipulated.
It is assumed that the reader possesses reasonable skills in mechan-
ics and electronics and is familiar with the Intermec Fingerprint
programming language and its related standard application pro-
grams. It is also assumed that the reader has access to the standard
tools of an electronics workshop.
Intermec EasyCoder 501 XP – Service Manual Ed. 4