Intermec EasyCoder 501 XP Service Manual page 29

Chapter 5 Media Supply
5.2 External Supply,
cont.
28
Installation, Fan Fold Guides
The bracket with the two guides can be fi tted either at the upper or
lower slot in the rear plate, depending on how the media supply is
located in relation to the printer.
Insert the complete unit through the slot from the outside and attach
it to the rear plate by means of two #T20 Torx screws. In case of
the upper position, use the screws included in the kit, and in case
of the lower position, use the two existing screws that hold the rear
plate to the bottom plate.
Adjust the position of the outer guide to fi t the width of the media.
Intermec EasyCoder 501 XP – Service Manual Ed. 4