Using The Scheduler; Setting Up The Recording Schedule - Huper huberDVR 2400 User Manual

Ch.5 huperRemote

Using the Scheduler

huperRemote can be configured to record surveillance videos on a regular basis. It has a
built-in Scheduler that allows you to set up specific day and time schedules for continuous
recording of surveillance video from remote cameras on your local drive.
Before opening the Scheduler, you first need to connect to the DVR sites that you want to set up
recording schedules for.

Setting up the Recording Schedule

To set up a regular schedule for video recording:
1. In the huperRemote program window, click
connect to a DVR site. (See page 79 to 80 for more details on adding and connecting to
DVR sites).
Or, if you are already connected to a DVR site, click the site name in the Camera List Panel
to select the site.
2. Click to open the Scheduler.
3. In the Scheduler dialog box, the names of the remote cameras on the DVR site will be
displayed. Choose the remote cameras that you want to record video from by clicking
the check boxes at the left side of the camera names.
Selected cameras are indicated by a check mark on check boxes.
4. The numbers that are lined up in columns represent the hours of a day. For each
selected camera, choose the desired hours when you want surveillance video to be
recorded by clicking the boxes underneath the hour columns.
to open the Connect dialog box and
97