Camera Operation Panel; Motion Detection Panel - Huper huberDVR 2400 User Manual

Camera Operation Panel

The Camera Operation Panel allows you to switch between three different control panels:
Motion Detection Panel, Camera Adjustment Panel, and PTZ Camera Control Panel. You will
be able to access these panels only when you have switched the screen to single view mode.
Click here to switch to the

Motion Detection Panel.

Motion Detection Panel
The Motion Detection Panel allows you to manually start or stop motion detection. The Start
and Stop buttons are available only when the current camera's motion detection function has not
been configured to be performed on a scheduled basis.
Click here to manually
start motion detection
for the current camera.
Click here to manually
stop motion detection
for the current camera.
14
Ch.2 Site Server
Click here to switch to the
Camera Adjustment Panel.
Click here to switch to the
PTZ Camera Control Panel.
Click here to specify
what areas to monitor
for presence of motion.
Click here to return to the
Camera Operation Panel.