Chapter 2: Site Server; Launching The Site Server - Huper huberDVR 2400 User Manual

Chapter 2
Site Server
Site Server is a video and audio surveillance and recording program. It allows up to 16 video
cameras, 16 audio input devices, and 16 sensors to be monitored simultaneously on the program
screen. For each camera, the motion detection feature can be activated for tracking and
recording motion events. For the utmost security, round-the-clock, non-stop video recording can
also be enabled. As the administrator of your huperDVR 2400 Surveillance System, you can also
create accounts for other users and give them access rights to Site Server and the other programs
of your huperDVR 2400 system.

Launching the Site Server

When launched for the first time, Site Server will allow any user to have access to the program.
To restrict the program's access rights only to privileged users, click to open the Preferences
dialog box, then click the User tab and select the "Enable access control" option.
When access control is enabled, Site Server will prompt for the User ID and Password everytime
the program is launched. Type "Administrator" in the "User ID" field and leave the "Password"
field empty. These are the defaults that are assigned to the administrator account.
It is strongly recommended that a password be defined for the administrator account. Select the
"Administrator" account in the Preferences dialog box: User tab and then click the Modify
button to set the password. Refer to the section, "User Accounts (User tab)", on page 53 for
more details on managing user accounts.
9