Auto - Huper huberDVR 2400 User Manual

Auto

Click here to enable
or disable auto-loop.
Enter the position numbers
of the PTZ cameras to be
looped (separated by a
comma).
Enter the pause duration
(in number of seconds) for
displaying each position.
These are the Auto-Pan
Speed controls.
Click this button to reset
the hardware settings of the
PTZ camera. (Not all PTZ
camera devices support the
reset function.)
Auto-Pan Position controls
Use these buttons to set the two camera positions for auto-panning.
Set Left Position:
Adjust the camera angle,
then click this button and
hold for 2 seconds to set it
as the left pan position. Or,
right-click the button to
specify a name and set the
current camera angle for the
preset.
20
Switch Left and
Right:
Auto-pan has two
navigation tours along
different sides of the
circumference. Click
this button to switch
between one another.
Ch.2 Site Server
Click this button to close
the PTZ Camera Control
Panel.
Click here to select a PTZ
camera that you want to
customize.
Click here to enable or
disable auto-panning.
These are the Auto-Pan
Position controls.
Click this button to
open the Settings dialog
box. (See page 22 to 25
for details).
Set Right Position:
Adjust the camera angle,
then click this button and
hold for 2 seconds to set it
as the right pan position.
Or, right-click the button
to specify a name and set
the current camera angle for
the preset.