Triggering Manual Events To Remote Cameras; Recording Surveillance Video - Huper huberDVR 2400 User Manual

Triggering Manual Events to Remote Cameras

If you see abnormal activities on one of the remote cameras, you can manually trigger an
event to that camera. To do so, first click the split screen that displays the remote camera.
Then click
activities to be logged and/or digitally recorded.
Note: The "Manual trigger" option of the remote camera must be enabled first at the DVR server.

Recording Surveillance Video

After huperRemote has connected to the DVR sites that you specified, the remote cameras
on each site are, by default, all selected for monitoring only. You can record video from all
cameras, or choose certain cameras to record video from.
A check mark in
the DVR site name
indicates that all
cameras under the
site are selected for
monitoring.
To record video from all remote cameras:
Click . Surveillance video from all remote cameras of the connected DVR sites will be
recorded to your local hard drive. Click this button again to stop the recording.
To record video from selected cameras only:
1. Click a camera on the split screen to select it.
2. In the Camera List Panel, click
stop the recording.
Note: In the Preferences dialog box: Storage tab, you can delete old video recordings, and also specify
when you want hard disk space to be recycled to free up disk space for saving new recordings.
(See page 101 for details).
84
to trigger a manual event to the camera. This allows the abnormal
to start the recording. Click this button again to
A red box in the
DVR site name
indicates that only
some cameras are
selected for
monitoring.