Chapter 2: Using; Connecting To Remote Dvr Sites - Huper huberDVR 2400 User Manual

Chapter 2
Using
Remote Viewer provides up to 16 split screens on the user interface for you to
simultaneously monitor remote cameras from multiple DVR sites. Each DVR site will have
a huperDVR server computer that is connected to surveillance cameras and other security
devices. You need to first specify the URL addresses and the login details of the huperDVR
servers that you would like to connect to.

Connecting to Remote DVR Sites

To add and connect to a remote DVR site:
1. Click to open the Connect dialog box.
2. Enter the DVR site's URL address in the
Site Server text box.
3. Clear the Guest login checkbox, then type in
the valid User name and Password for
connecting to the DVR site.
4. Select Add to connection list to add the
DVR site to huperRemote's Camera List
Panel, then click OK. huperRemote will
then connect to the specified DVR site and
display the remote cameras.
5. The DVR site will be added to the Camera
List Panel. Click
see the names of the different cameras in the
DVR site, click on the "+" sign.
6. By default, the site is named with the site
name that has been specified in the remote
DVR site. To rename it, click on the text
and type in the desired name.
7. huperRemote allows you to connect to
multiple DVR sites at the same time. Repeat
steps 1 to 6 to add more DVR sites.
Note: If you want to change the information of a DVR site, select then right-click the DVR site name
in the Camera List Panel. The Site Information dialog box will then open where you can make
modifications.
6
to open this panel. To
Ch.2 Using huperRemote