Display) Of Dynacolor Dome Camera; Appendix 9: An Example Of Ptz Custom Command Usage: Enable Osd (On Screen Display) Of Dynacolor Dome Camera - Huper huberDVR 2400 User Manual

Appendix 9
An Example of PTZ Custom
Command Usage:
Enable OSD (On Screen Display) of DynaColor
Dome Camera
DynaColor dome camera support the OSD (On Screen Display) commands for device setting.
Below is an example to use the Custom Command page of Advance PTZ Control Panel to
operate the OSD commands of DynaColor dome camera.
Step 1: Click the
Advance PTZ Control Panel.
Step 2: Click the
dialog box. Click the "Custom" tab to go to the "Custom" setting page.
Step 3: Select check boxes, enter command names and command codes as what shows in the
below picture.
214
icon on the Camera Control Panel of DVR server to display the
button on the Advance PTZ Control Panel to display the "Settings"
Appendix