Monitoring Remote Cameras - Huper huberDVR 2400 User Manual

Another way of adding DVR sites is to click
Group dialog box will then be displayed where you can add a new DVR site. This dialog
box also allows you to create a group name for grouping existing DVR sites. (See page 86 for
information on how to group DVR sites.)
To connect and disconnect an existing DVR site:
To connect to a DVR site, double-click the site name in the Camera List Panel. Double-
click the site name again to disconnect from the DVR site.
To disconnect all connected DVR sites:
Click . This closes all connections.

Monitoring Remote Cameras

When huperRemote has successfully established connection with the DVR site(s) that you
added to the Camera List Panel, you will be able to see real-time video from the remote
cameras on the site(s).
This Multi-screen Display
can have up to 16 split
screens to show live video
from remote cameras of one
or more DVR sites.
Click to enable
the audio of a
remote camera.
80
These buttons allow you
to change how split
screens are displayed.
in the Camera List Panel. The Add Site/
Preferences
Event-
only mode Voice communication
This is the Camera
List Panel.
This is the
Connect
button. Click
to connect to
a remote
DVR site or
disconnect all
the sites listed
in the Camera
List Panel.