Huper huberDVR 2400 User Manual page 93

Ch.5 huperRemote
Event Lists the recording time of events only.
Local Lists the recording time of surveillance videos that were recorded and
stored in the local hard drive.
History records of the selected type will then be retrieved from the DVR server or your local
drive and then displayed in the Camera List Panel.
Retrieving a Specified Range of History Records
If you chose "Normal" or "Event" as the type and the retrieved history records are
quite long, you can limit the history list by specifying a desired range.
To specify a range of "Normal" history records:
1. Click . A time interval text box will then appear
at the bottom of the Camera List Panel.
2. By default, Normal-type history records are listed in
intervals of one hour. To change the interval, click
the Up/Down arrow button or enter the desired time
interval.
3. Click OK to confirm the change. (To retain the
original interval, click Cancel.)
To specify a range of "Event" history records:
1. Click . A time ruler will then appear at
the bottom of the Camera List Panel.
2. By default, all Event-type history records on
the selected calendar date will be retrieved and
listed in the Camera List Panel. To limit the
history list to a certain time period, drag the
two handles on the time ruler to set the
desired start and end time.
3. Click OK to confirm the change. (To keep the
original history list, click Cancel.)
93