Huper huberDVR 2400 User Manual page 139

6. Including I/O Devices to the operation of DVR Site Server
When an input device has been triggered to issue an event, Site Server can have three
reactions:
1. In the event recording mode, starts the video recording and Site Server keeps recording
till the event ends.
2. In non-event recording mode, the event time segment is recorded to enable searching
of video recordings later.
3. Issue event notifications.
In order to include input devices to the normal operation of Site Server, you need to select
the "Sensor detection" option in the "Detect events by" group on the "Preference/
Camera" page for certain cameras. Then click the "Settings" button behind the option
"Sensor detection" to assign input devices.
Output devices are for event notification. You can select the "External devices" option in
the "Respond to events by" group on "Preference/Camera" page for certain cameras. Then
click the "Settings" button behind the option "External devices" to assign output devices.
139