Retrieving A Specified Range Of History Records - Huper huberDVR 2400 User Manual

Event
Local
History records of the selected type will then be retrieved from the DVR server or your
local drive and then displayed in the Camera List Panel.

Retrieving a Specified Range of History Records

If you chose "Normal" or "Event" as the type and the retrieved history records are quite
long, you can limit the history list by specifying a desired range.
20
Lists the recording time of events only.
Lists the recording time of surveillance videos that were recorded and
stored in the local hard drive.
To specify a range of "Normal" history records:
1. Click
appear at the bottom of the Camera List Panel.
2. By default, Normal-type history records are listed
in intervals of one hour. To change the interval,
click the Up/Down arrow button or enter the
desired time interval.
3. Click OK to confirm the change. (To retain the
original interval, click Cancel.)
To specify a range of "Event" history records:
1. Click
the bottom of the Camera List Panel.
2. By default, all Event-type history records on
the selected calendar date will be retrieved and
listed in the Camera List Panel. To limit the
history list to a certain time period, drag the
two handles on the time ruler to set the
desired start and end time.
3. Click OK to confirm the change. (To keep the
original history list, click Cancel.)
. A time interval text box will then
. A time ruler will then appear at