Huper huberDVR 2400 User Manual page 71

1 Start Time
Current Timecode
2
End Time
3
Navigation Bar
4
Play / Pause
5
6 Stop
Previous / Next Frame
7
8 Backward / Forward
9 Slow Motion
Normal Speed
10
11 Fast Motion
12
Mute
When playing records that were selected from the "All
records" list, this shows the start time of the selected time
segment.
When playing events, 00:00:00 will be shown as the
"Start Time".
Shows the timecode of the current video scene.
When playing records that were selected from the "All
records" list, this shows the end time of the selected time
segment.
When playing events, the maximum time length between
events will be shown as the "End Time".
Allows you to jump directly to any part of the recorded
video. Drag the slider tab to the desired part of the
recorded video.
Plays/Pauses the playback at the current frame.
Terminates the playback and moves to the starting frame.
Moves to the previous/next video frame. (Only available
in single view.)
Moves back/forward one or more video frames.
Slows down video playback. Click once to play the
recorded video at half (1/2 x) the normal speed. Click
again to play the video at a quarter (1/4 x) of the normal
speed. The slowest speed is 1/8 x.
Plays the recorded video at its original speed.
Increases the playback speed of the video. Click once to
double (2 x) the playback speed. Click again to
quadruple (4 x) the playback speed. The maximum speed
is 16 x.
Toggles between playing/muting the audio associated
with the recorded video.
71