Viewing Recorded Video - Huper huberDVR 2400 User Manual

Ch.5 huperRemote
Decrease display speed
11
Normal display speed
12
Increase display speed
13
Zoom in/out
14
Snapshot
15

Viewing Recorded Video

To search for recorded surveillance videos and play them, there are four major steps that
you need to do:
1. First, connect to the DVR server where the recordings are stored.
2. Choose the date of recording.
3. Specify the type of history records to access, then search and retrieve the history
records.
4. If the recordings are stored in the DVR server, stream the videos from the server, or
download them first for local playback from your hard drive.
Whereas if the recordings are locally stored in your computer, play back the videos
from your hard drive.
The succeeding sections explain each of these steps in detail.
Slows down video playback. Click once to play the
recorded video at half (1/2 x) the normal speed. Click
again to play the video at a quarter (1/4 x) of the
normal speed. The slowest speed is 1/8 x.
Plays the recorded video at its original speed.
Increases the playback speed of the video. Click once to
double (2 x) the playback speed. Click again to
quadruple (4 x) the playback speed. The maximum
speed is 16 x.
When playing video recordings, you can change the
zoom ratio of the video by clicking this button.
To zoom in a video, first click the split screen that
displays the video, then click this button. Click this
button again to zoom out.
Click this button to capture the current video frame
and save it as a JPEG or BMP file.
To capture the current frame from a video, first click
the split screen that displays the video, then click this
button. This opens the Snapshot dialog box where you
can enhance the image first before saving, printing, or
sending it out by e-mail. (See page 96 for details).
91