Map Button; Channel Selection Panel; Camera Panel; Input/Output Device Panel - Huper huberDVR 2400 User Manual

Map button

Click the Map button to switch Site Server to Map mode. This mode shows a graphical layout of
the site being monitored, with clear indications on where the video cameras, sensors, and/or
alarms are installed. (See "Monitoring a Site in Map Mode" on page 21 for details.)

Channel Selection Panel

By default, Video Camera buttons are displayed at the bottom of the Site Server program
window. These buttons allow you to display a split screen in single view.
If there are input/output devices such as sensors and alarms also connected, you can easily switch
between viewing video cameras and monitoring the input/output devices.

Camera Panel

This panel provides camera buttons that are numbered in sequence and a Switcher button.
To monitor a video
camera, click its camera
number. The screen then
changes into single view,
displaying live video from
the selected camera.

Input/Output Device Panel

Input/Output Device Panel displays light indicators that show whether the input/output devices
are connected to the Site Server.
The top row of light indicators show the connection status of input devices
such as sensors. A green light indicates that the device is connected. A red
light indicates that the device is transmitting signal to Site Server.
The bottom row of light indicators show the connection status of output
devices such as alarms. A green light indicates that the device is connected.
A red light indicates that Site Server is transmitting signal to the device.
12
Ch.2 Site Server
Click the Switcher
button to change to
the Input/Output
Device Panel.
Click the
Switcher button
to change to the
Camera Panel.