Enabling Audio From Remote Cameras; Voice Communication With A Dvr Server; Remote Camera Controls - Huper huberDVR 2400 User Manual

Enabling Audio from Remote Cameras

In case you see abnormal activities while monitoring a remote camera, you can enable the
audio from the camera and listen to it through your computer speakers.
To do so, first click the split screen that displays the remote camera, then click
Click this button again to turn off the audio.

Voice Communication with a DVR Server

If the huperDVR server on the DVR site is enabled to accept two-way communication
requests from remote client computers that are running huperRemote, you will be able to
initiate voice communication with the person who is operating the DVR server.
Simply click
Note: You can specify which sound card to use for audio input and make adjustments to the sound
volume in the Preferences dialog box: Voice Communication tab. (See page 31 for details).

Remote Camera Controls

Use these buttons to have access to the different DVR sites and their respective remote
cameras, and to control how video from these cameras are displayed on the huperRemote
program window.
Increases the display frame rate of a selected camera. If your network
connection bandwidth is limited, it may be helpful to increase the frame rate of
the selected camera.
Triggers a manual event to a remote camera. (See page 11 for details).
Expands the Camera List Panel. More button controls in the Camera List Panel
will then be displayed. Click again to retract and change the panel back to its
original size. (See page 12 for more details on the Camera List Panel).
Click to change to the PTZ Camera Control Panel. (See page 14 for details).
10
to initiate voice communication.
Ch.2 Using huperRemote
.