Huper huberDVR 2400 User Manual page 107

Ch.6 Remote Viewer
To configure the settings in the "Log In" dialog box:
1. Enter a valid user ID and password.
Note: If the remote DVR Site Server does not enable the access control, select the "Guest log in"
check box.
2. Select "Internet connection."
3. Enter the IP address or domain name of the remote DVR Site Server.
4. Select the bandwidth speed of the Internet connection.
5. By default, All cameras is selected.
6. You can select a past connection from the drop-down list to fill out the Connection
information.
7. Click OK to connect to the DVR site server.
After clicking OK, you should be able to see live video feed from the remote camera(s) on the
split screen display.
Note: 1. Before using Remote Viewer through an Internet connection, make sure that the remote
DVR Site Server has "Allow remote access" and "Enable Web server" selected in Preferences -
General tab (valid TCP port must also be entered), the DVR machine has been assigned a
unique IP address, and your client machine that runs Remote Viewer can connect to the
Internet.
2. The Web browser version you have should either be Microsoft Internet Explorer version 5.5
or a later version.
107