Appendix 2: The Profile Settings Of Livetag.ini - Huper huberDVR 2400 User Manual

Appendix 2
The profile settings of LiveTag.ini
What is the profile settings for?
Some settings of huperDVR 2400 are related to the product models and hardware
environments. These settings are put on the "LiveTag.Ini" file with default values. Installers and
users can modify the settings for customization or performance/quality tuning.
Where is the file for the setting?
The file "LiveTag.Ini" is placed at the product installed folder. The default location of the file is at
"Drive:\ Program Files\huperLab\huperDVR 2400\Bin", where Drive could be C, D, etc.
How to Modify the Settings?
Prior to the modification, you need to know each setting standing for. Below explain the settings
one by one.
1. [SYSTEM] Section
Key Name
Field_sync
Smart_Saving_interval
Quick_display_format
140
Default Description
1 Enable it if the capture board has the Field Sync
Circuit for field sync. Disable it if the capture
board has no Field Sync Circuit. 1 for enable and
0 for disable. Not to enable the setting on capture
board without the Field Sync Circuit, otherwise,
frozen video may happen.
1 Specify the recording frame rate while no motion
video in No-stop Smart recording mode. 1 for
1fps, 2 for 0.5 fps, etc.
1 Enable/disable the quick video display. 1 for
enable, 0 for disable. If the video display card
cannot display image correctly, please update to
newest display card driver or disable the quick
video display function.
Appendix