Setting Up An Advanced Connection; For Windows Xp - Huper huberDVR 2400 User Manual

Ch.6 Remote Viewer
and configure the settings to be able to connect to the DVR site server using a direct modem
connection.
To configure the settings in the "Log In" dialog box:
1
2
3
4
5
6
1. Enter a valid user ID and password.
Note: If the remote DVR Site Server does not enable the access control, select the "Guest log in"
check box.
2. Select "Direct modem connection."
3. Specify the telephone number of the DVR Site Server that you want to watch via remote.
4. Specify the modem driver at the local machine.
5. By default, All cameras is selected.
6. You can select a past connection from the drop-down list to fill out the Connection
information.
7. Click OK to connect to the DVR site server.
After clicking OK, you should be able to see live video feed from the remote camera(s) on the
split screen display.

Setting up an Advanced Connection

For Windows XP

1. Plug a modem device into a COM port of the DVR Site Server machine.
7
109