Huper huberDVR 2400 User Manual page 28

These are camera icons.
3
Drag them onto the
map, and drop each of
them to the installed
location of each camera.
These are sensor icons.
4
Drag them onto the
map, and drop each of
them to the installed
location of each sensor.
In gray color, indicates that there is no video camera connected.
In light blue color, indicates that there is a video camera connected but the
corresponding camera icon has not yet been plotted on the site map.
In dark blue color, indicates that there is a video camera connected and the
corresponding camera icon has already been plotted on the site map.
28
Click this button
1
to load the map's
image file (in BMP
format).
Type in a name
2
for the map.
5
Drag the output device
6
icons onto the map,
and drop each of them
to the installed location
of each device.
Ch.2 Site Server
When you are done
8
positioning icons, click this
button to return to Map
mode.
Click this button to switch
to output device icons.
Click this
7
button to switch
to sensor icons.