Viewing Records By Time Segments; Selecting Video Cameras - Huper huberDVR 2400 User Manual

Viewing records by time segments

To view records by time segments:
1. Select "All Records" from the "Record type" drop-
down list.
2. By default, the History list displays time segments in
intervals of one hour.
To change the interval, click
dialog box, specify the desired interval for displaying
time segments.
3. Click a desired time segment in the History list.
4. Select All in the Camera drop-down list then in the
Camera Selection Panel, click the cameras whose
video recordings you want to access for the selected
time segment. As you select more cameras, the number
of split screens increases. (See "Selecting video
cameras" below for more details on Camera buttons
and split screens.)
Note: To have different combinations of camera
selections and store each set of combinations,
use the Memory buttons. (See "Memory
buttons" on page 61 for details.)
5. When you click the Play button on the Navigation Panel,
video recordings from the selected cameras will
simultaneously be played on-screen. (See page 64 for
details on the Navigation Panel.)

Selecting video cameras

The Camera buttons in the Camera Selection Panel are only enabled when All is selected in the
Camera drop-down list. The Camera buttons on the Camera Selection Panel are toggle buttons
and allow multiple selection of video cameras. To view recorded videos from selected cameras,
choose the video cameras by clicking the corresponding number buttons. To deselect video
cameras, click on their corresponding number buttons again.
The number of selected cameras determines the split screen layout of the Record Player program
screen, as depicted in the table next page.
To deselect all selected cameras and allow single camera selection only, click the
color of the camera image on the button then changes to green, indicating that the Camera
Selection Panel is now in single camera selection mode.
66
. In the Preferences
Ch.3 Record Player
Camera Selection Panel
button. The