Huper huberDVR 2400 User Manual page 123

Pan & Tilt control
2
Preset buttons
3
Zoom control
4
Record button
5
6 Stop button
Connect Camera button
7
8 Disconnect Camera button
9 Connect Site button
2
3
5
7
This is the Pan and Tilt control. Click one of the four
arrow buttons to adjust the camera angle up, down, left,
or right. Click the "cross" button to stop movement.
The number buttons are Preset buttons that let you store
camera angle positions. Click a preset button and hold
for 2 seconds to record the current PTZ camera's angle
position.
Click the up arrow to zoom in, or the down arrow to
zoom out. Or, click the circle button to go back to the
default zoom ratio. If the PTZ camera does not provide
zoom scaling feature, click the up or down arrow
continuously to zoom in or out.
Click this button to start recording video from the
selected camera.
Click this button to stop recording the video from the
selected camera.
Click to display the "Log In" dialog box to connect to the
selected remote camera.
Click to disconnect the selected camera.
Click to display the "Log In" dialog box to connect to a
remote DVR site. Click again to disconnect all camera
connections.
4
6
8
9
123