Zooming The Video During Playback; Detecting Motion In The Recorded Video; Saving Video - Huper huberDVR 2400 User Manual

Ch.3 Record Player

Zooming the video during playback

When playing recorded surveillance video in single view, you can zoom in or out of the video
with ease. Click the button repeatedly to cycle through different video frame sizes: "320 x
240", "640 x 480", and "Fit into Split Screen".

Detecting motion in the recorded video

When playing back recorded video, motion detection can be applied to the video. This allows
you to instantly spot movements on video.
To detect motion on the recorded video more accurately, you can fine tune motion detection
settings. Click the button to adjust settings and mask out parts of the video where motion
can be ignored. (Refer to "Fine tuning motion detection settings" on page 42 for more details on
motion detection.)
Note: Motion detection can be applied only when the recorded video is played in single view mode.

Saving video

The whole or part of a recorded surveillance video can be saved as a video file. Click to open
the following dialog box and specify the desired part of the video to save.
By default, the "Start time" and "End time" values are set to the actual start and end times of
recording. To choose a portion from the recorded video, change the "Start time" and "End
time" settings to the desired start and end timecodes.
To check whether you have selected the appropriate part of the video, click the Preview button.
After previewing, you can then choose to save the video as an AVI or a self-executable video file.
After selecting the video file format, enter the file name and folder path where you want to save
the video file then click OK.
72