Setting The Date And Time; Scheduling Reports - Huper huberDVR 2400 User Manual

Setting the date and time

If the system's date and time are not configured correctly, click the Date & Time button to
make proper adjustments. This is crucial for Site Server to accurately record the date and time of
detected events.
Scheduling repor ts
Site Server can send by e-mail periodic reports that show information about detected events.
Click the Report button to specify what types of events to include in the reports and to whom the
reports will be sent.
1
2
3
4
5
1 Daily/Weekly/Monthly report
Events detected by
2
3
SMTP server
4 E-mail from
5 E-mail to
Choose whether to send reports on a daily, weekly,
or monthly basis.
Select which events to include in the reports (that
is, events which have been detected by Motion
detection, Sensor detection, Manual trigger, or all
of the above).
Specify the name of the SMTP server that will
handle e-mail deliverance.
Specify the sender's e-mail address.
Specify the recipient's e-mail address. If there are
multiple recipients, separate each of their e-mail
addresses with a semicolon.
35